H12-831_V1.0-ENU Testengine, H12-831_V1.0-ENU Online Tests
Man soll stets Maßnahmen für Erfolg, sondern keine Ausreden für Misserfog finden. Die Schulungsunterlagen zur Huawei H12-831_V1.0-ENU Zertifizierungsprüfung von Pass4Test enthalten Testaufgaben und Antworten, die von unseren erfahrenen IT-Experten durch ihre ständige Praxis und Erforschung entworfen sind. Sie verfügen über hohe Genauigkeit und große Reichweite. Sie werden Ihr bester Helfer sein, während Sie die Huawei H12-831_V1.0-ENU Zertifizierungsprüfung vorbereiten.
Die Fragen und Antworten zur Huawei H12-831_V1.0-ENU Zertifizierungsprüfung von Pass4Test sind den echten Prüfung sehr ähnlich. Wenn Sie die Prüfungsfragen und Antworten von Pass4Test wählen, bieten wir Ihnen einen einjährigen kostenlosen Update-Service. Wir versprechen, dass Sie die Huawei H12-831_V1.0-ENU Prüfung 100% bestehen können. Sonst erstatteten wir Ihnen die gesammte Summe zurück.
>> H12-831_V1.0-ENU Testengine <<
H12-831_V1.0-ENU HCIP-Datacom-Advanced Routing & Switching Technology V1.0 Pass4sure Zertifizierung & HCIP-Datacom-Advanced Routing & Switching Technology V1.0 zuverlässige Prüfung Übung
Pass4Test hilft Ihnen, Huawei H12-831_V1.0-ENU Prüfungsfragen und Antworten in einer echten Umgebung zu machen. Wenn Sie Einsteiger sind und Ihre beruflichen Fähigkeiten verbessern wollen, werden die Fragenkataloge zur Huawei H12-831_V1.0-ENU Zertifizierungsprüfung von Pass4Test Ihnen helfen, Ihren Traum Schritt für Schritt zu verwirklichen. Wir werden alle Ihren Fragen bezüglich der Prüfung lösen. Innerhalb eines Jahres bieten wir Ihnen kostenlosen Update-Service. Bitte schenken Sie unserer Website mehr Aufmerksamkeit.
Das Huawei H12-831_V1.0 (HCIP-DATACOM-Advanced Routing & Switching Technology V1.0) ist eine Zertifizierungsprüfung auf fortgeschrittener Ebene, die von Huawei Technologies Co. Ltd. angeboten wird IT -Fachleute im Bereich der fortschrittlichen Routing- und Switching -Technologie. Die Prüfung deckt eine breite Palette von Themen ab, darunter Netzwerkdesign, Routing -Protokolle, Schalttechnologien und Netzwerksicherheit.
Huawei HCIP-Datacom-Advanced Routing & Switching Technology V1.0 H12-831_V1.0-ENU Prüfungsfragen mit Lösungen (Q16-Q21):
16. Frage
OSPFv3 runs on R1 and R2, and the IPv6 addresses configured for the interfaces are marked in the figure.
The router IDs of R1 and R2 are 10.0.1.1 and 10.0.2.2, respectively.

Which of the following statements is true?
- A. The Intra-Area-Prefix-LSA generated by R2 describes four prefixes.
- B. The Intra-Area-Prefix-LSA generated by R1 describes four prefixes.
- C. The Intra-Area-Prefix-LSA generated by R1 describes three prefixes.
- D. The Intra-Area-Prefix-LSA generated by R2 describes three prefixes.
Antwort: B
Begründung:
Comprehensive and Detailed In-Depth Explanation:
Understanding Intra-Area-Prefix-LSA (Type 9) in OSPFv3
* OSPFv3 uses the Intra-Area-Prefix-LSA (Type 9) to advertise IPv6 prefixes associated with either:
* A Router-LSA (Type 1) # Describes links and interfaces.
* A Network-LSA (Type 2) # Advertises multi-access networks (if a Designated Router exists).
* Each router generates one Intra-Area-Prefix-LSA to advertise its own IPv6 prefixes.
Prefix Analysis for Each Router
R1's IPv6 Prefixes:
* 2000:12::1/64
* 2001:12::1/64
* 2002:12::1/64
* 2003:12::/64 (Shared link with R2)
* Total Prefixes in R1's Intra-Area-Prefix-LSA = 4
# R1 advertises four prefixes in its Intra-Area-Prefix-LSA.
R2's IPv6 Prefixes:
* 2003:12::2/64 (Shared link with R1)
* Total Prefixes in R2's Intra-Area-Prefix-LSA = 1
# R2 advertises only one prefix in its Intra-Area-Prefix-LSA.
Checking Each Option:
# A. The Intra-Area-Prefix-LSA generated by R2 describes three prefixes. (# False, R2 only has one prefix).
# B. The Intra-Area-Prefix-LSA generated by R1 describes four prefixes. (# True, R1 has four prefixes).
# C. The Intra-Area-Prefix-LSA generated by R2 describes four prefixes. (# False, R2 only has one prefix).
# D. The Intra-Area-Prefix-LSA generated by R1 describes three prefixes. (# False, R1 has four prefixes).
Final Conclusion:
# B. The Intra-Area-Prefix-LSA generated by R1 describes four prefixes.
Thus, the correct answer is: B. The Intra-Area-Prefix-LSA generated by R1 describes four prefixes.
17. Frage
Which of the following are advantages of VLAN aggregation?
- A. decreasedIPwaste of address
- B. accomplishSub-VLANIsolation between broadcast domains
- C. Increased addressing flexibility
- D. added availableM LANquantity
Antwort: A,B
18. Frage
When a fault occurs, the fault can be classified to reduce the scope of fault location. Which of the following is not an interface configuration fault?
- A. IP address conflict
- B. Inconsistent interface authentication
- C. The duplex modes of the interfaces on both ends are inconsistent
- D. The receiving and emitting power of both ends is inconsistent
Antwort: D
19. Frage
In OSPF, ABR will convert all Type 7 LSAs in the NSSA area into Type 5 LSAs.
Antwort: A
20. Frage
On the IS-IS network shown in the figure, R1 imports a default route using the default-route-advertise always level-1 command. Which of the following statements are true?

- A. The default route exists in the routing table of R2.
- B. The default route does not exist in the routing table of R1.
- C. Although the default-route-advertise always level-1 command is configured on R1, R1 cannot import the default route.
- D. The default route exists in the routing table of R3.
Antwort: A,B
Begründung:
Comprehensive and Detailed In-Depth Explanation:
Understanding the IS-IS Levels and Default Route Advertisement:
* R1 is a Level-1 router
* R2 is a Level-1-2 router (meaning it connects both Level-1 and Level-2 areas)
* R3 is a Level-2-only router
Step 1: What Does "default-route-advertise always level-1" Do?
* This command forces R1 to advertise a default route (0.0.0.0/0) to all its Level-1 IS-IS neighbors, regardless of whether R1 has a default route in its routing table.
* Since R1 is a Level-1 router, it does not participate in Level-2 routing, meaning it relies on R2 (a Level-1-2 router) for external connectivity.
Step 2: Checking the Routing Tables
* R1: Since it is only a Level-1 router and does not receive a default route from any higher-level router, it does not have a default route in its own routing table. # (D is correct)
* R2: Since R1 advertises the default route at Level-1, R2 (a Level-1-2 router) receives this default route in its Level-1 database. # (B is correct)
* R3: R3 is a Level-2-only router, and default routes are not automatically leaked between Level-1 and Level-2 unless explicitly configured.
* Since no explicit route leaking configuration is mentioned, R3 will not have the default route
# (C is incorrect).
* A is incorrect because the command successfully advertises a default route from R1 to Level-1 neighbors like R2.
Final answer: # B, D
References:
* HCIP-Datacom-Advanced Routing & Switching Technology V1.0 - IS-IS Default Route Advertisement
* IS-IS Routing Level-1 and Level-2 Behavior
* IS-IS Route Leaking and Default Route Propagation
21. Frage
......
Warum wollen wir, Sie vor dem Kaufen der Huawei H12-831_V1.0-ENU Prüfungsunterlagen zuerst zu probieren? Warum dürfen wir garantieren, dass Ihr Geld für die Software zurückgeben, falls Sie in der Huawei H12-831_V1.0-ENU Prüfung durchfallen? Der Grund liegt auf unserer Konfidenz für unsere Produkte. Die Huawei H12-831_V1.0-ENU Prüfung wird fortlaufend aktualisiert und wir aktualisieren gleichzeitig unsere Software.
H12-831_V1.0-ENU Online Tests: https://www.pass4test.de/H12-831_V1.0-ENU.html